Shenzhen Yuan Mechanical Electronic Co., Ltd.
Main products:Tripod Turnstile,Speed Gate,Flap Barrier,Full Height Turnstile,Drop Arm Turnstile
Products
Contact Us
  • Contact Person : Mr. Li Wei
  • Company Name : Shenzhen Yuan Mechanical Electronic Co., Ltd.
  • Tel : 86-0755-61110432
  • Fax : 86-0755-61110431
  • Address : Guangdong,Shenzhen city,4th floor, building 1, Heping industrial park, Science and technology road, Longhua town, Baoan district, Shenzhen
  • Country/Region : China
  • Zip : 518109

Card dispenser

Card dispenser
Product Detailed
Industrial design, adjust to high temperature and other bad environments; better adaptability to various deformed cards

1, Main characteristics

l       Industrial design, adjust to high temperature and other bad environments;

l       Simulated manpower friction card issuers ,better adaptability to various deformed cards;

l       Watchdog of hardware and embedded operating system to ensure properly running;

l       Pre-dispense function accelerate dispensing speed;

l       Connectable with the vehicle detector to achieve card issuing and “one car, one card”;

l       Automatic buzzer alarm when no cards, fewer cards or failure.

l       Provide both RS232 and I/O voltage control interface;

l       Automatic buzzer alarm when errors occur, automatic reset after 100 seconds alarm;

l       Capacity of card stacker is more than 40pcs, automatic buzzer alarm when the withdrawing stacker is full;

l       Slide card stacker with a capacity of 40pc;

l       Adjustable of card stacker with a capacity of 120pc each;

l       Automatic withdrawal to prevent card lost (only for TCD800F series

l       Slide design to make installation and disassembling easier;

l       Molded production to ensure high consistency of precision and quality.

2, Main technical data

l          Operating voltage: 24VDC (max current 2A, static current 0.1A)

l          Operating temperature: -20°C to 85°C

l          Operating humidity: 30-90% (comparatively)

l          Use condition: install in bin

l          Card available: width: 54+/-0.5mm, Length: 85+/-0.5mm

l          Thickness: 0.3-2.5mm (adjustable)

l          Card material: Paper or Polyester card

l          Net weight of card dispenser: 2.0kg (including the briquette)

l          Time of issuing: max0.5s

l          Capacity of stacker: 150pcs (0.8mm), 100pcs available when an extra stacker is needed

3, Control interface

This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board, RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.

3.1 TTL control interface(CN3)

Pins

Signal Description

Pins

Signal Description

1

-24V

7

VD

2

+24 VDC

8

Callback

3

0V

9

OutOK

4

Payout

10

Lower

5

Reset

11

Error

6

0V

12

Empty

3.2 RS232 control interface

Pins

Signal Description

Signal Description

1

GND

Ground

2

RXD

RS232 receive port

3

TXD

RS232 send port

3.3     DIP settings and the function definition(CN9)

DIP1

ON

pre-read issuing card

OFF

directly issue card

DIP2

ON

OUTOK as the getting card signal

OFF

OUTOK as the card on signal

DIP3

ON

ignore VD input signal

OFF

input VD signal

DIP4

ON

forbid recovering overtime 100s

OFF

Allow recover overtime 100s

4,Dispenser working states indication

NO.

Card dispenser Working states

Buzzer Output

Port Output

1

Reset

Consecutive ring“toot toot”

No

2

Lack card       (can dispense card)

Interval ring “toot”

Lower

3

Jam card     (can’t dispense card)

Interval ring “toot toot”

Error

4

Overtime error (can’t dispense card)

Interval ring “toot ,toot, toot”

5

Warehouse full   (can dispense card)

Interval ring “toot,toot ,toot, toot”

6

Empty

Interval ring “toot,toot ,toot,toot, toot”

Lower

Card dispenser



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.